Services

The directory holds 136 companies under Services. Service providers are the firms most building owners deal with day to day: planned maintenance visits. Callouts when a lift stops, repairs.

Often the paperwork that goes with a lift used to carry people.

Category labels come from how each business presents itself publicly, so the boundaries are soft: plenty of firms install, maintain and tell, and appear under whichever heading matched their own description best.

If a company looks close but not exact, its profile page will usually make the real scope clearer.

Entries in this category are spread across 112 towns and cities, including Aberdeen, Amersham, Ampthill, Andover, Ascot and Ashford and 106 more.

Coverage areas commonly extend well past the registered address, so treat the town as a starting point rather than a limit.

Nothing on this page is a ranking.

The sensible way to use it is to shortlist two or three entries, then ask each the same set of questions so the answers can be compared like for like.

• Which makers and lift types they usually work on. Whether they can get parts for yours.
• Whether they hold current public liability insurance, and what level of cover.
• How their engineers are assessed as competent on your specific equipment.
• Their published callout time for a breakdown versus a planned visit, and what hours that covers.
• For lifts carrying people: how LOLER thorough examinations are arranged and who acts as the competent person.
• What the quote includes — parts, labour, call-out charges and out-of-hours rates — in writing.

Registered locations for this category run across the following towns and cities: Aberdeen, Amersham, Ampthill, Andover, Ascot, Ashford, Ashington, Aylesbury, Barnstaple, Basildon, Basingstoke, Bathgate, Battle, Beachampton, Beeston, Bellshill, Birmingham, Bishopbriggs, Blyth, Boldon Colliery, Bon-y-maen, Bootle, Brighton and Hove, Buckley, Cardiff, Carshalton, Castlereagh, Coalville, Colchester, Corfe Mullen, Cradley Heath, Darlington, Dartford, Deeside, Dublin, Dublin 24, Dublin 4, Dunmow, Earley, East Kilbride, Edinburgh, Enfield, Exeter, Fareham, Forest Row, Gainsborough, Gate Helmsley, Gateshead, Glasgow, Gorsley, Hamilton, Harrisburg, Havant, Hayward, Highcliffe, Honiton, Invergordon, Inverness, Irvine, Keighley, Kettering, Kingston upon Hull, Kingswinford, Leicester Forest East, Lincoln, Linlithgow, Little Burstead, Liverpool, Livingston, London, Manchester, Martock, Middlesbrough, Milton Keynes, Nelson, Norwich, Oldham, Peterborough, Pinxton, Plymouth, Polegate, Pontefract, Poole, Portlethen, Pudsey, Ramsgate, Redditch, Ringwood, Rochester, Rotherham, Runcorn, Saint Austell, Scarborough, Sheffield, Sidcup, Skipton, St Helens, St.

Ives, Stepps, Stoke-on-Trent, Syston, Tanfield Lea, Tividale, Torquay, Uxbridge, Warrington, Washbrook, Welham Green, Wellingborough, Whiteley, Wigan, Wooburn Green.

A registered address says where the paperwork sits, not where the engineers go. Firms with a single office usually cover a whole region.

Larger operators may run engineers out of depots that never appear on a register at all.

If your town is missing from that list, the nearest entry on it is usually the right place to start.

Working the other way round is often quicker: open the city page for the nearest large town, see every category represented there, and narrow down from a shorter list.

Most enquiries that reach a lift company fall into one of four buckets. Knowing which one you are in changes who you should be calling and how urgently.

The first is an entrapment: someone is inside a lift that has stopped.

That is handled by the alarm or emergency telephone in the car, or the number on the notice at the landing, not by ringing round a directory.

Stay in contact with the person inside and wait for the release company or the emergency services. Nobody should try to open doors or move the car.

The second is a breakdown with nobody inside. Here the useful thing you can do is describe the state precisely from the landing: where the car is sitting.

Whether the doors are open, closed or part-open, anything shown on a display or indicator, any repeating sound. Whether a key switch or fire-service switch has been operated.

Report exactly what you see and leave the lift out of service until an engineer attends.

The third is planned work: a maintenance contract, a repair quoted after a previous visit, an upgrade work, or a new fitting. These are planned rather than urgent.

They are where comparing two or three companies on identical questions really pays off.

The fourth is compliance. Any lift used to carry people needs a LOLER thorough examination at the legal interval. Done by a competent person who is independent of the routine maintenance.

Maintenance and thorough examination are separate duties, and a maintenance contract on its own does not discharge the second.

Every entry is built from public details: company registers, the company's own published details, and public contact pages. We do not vet, accredit or endorse the companies listed, none of them pays to appear.

Being listed means no partnership or supplier relationship with lifttroubleshooting.com.

Details change. Company names, ownership and contact routes all move over time, so confirm anything important directly with the company before you rely on it.

If you spot an entry that is out of date, tell us and we will look at it.

A first phone call is short. It is mostly the company assessing whether your job is one they can take.

You can make that assessment faster, and get a more honest answer, by leading with the equipment rather than the problem.

Give the lift type, the manufacturer and model, roughly how old it is, and how many floors it serves.

A firm that does not work on your make will usually say so within a sentence, which saves both sides an appointment.

Then ask the practical questions in a fixed order so you can compare answers between companies later. Do they hold current public liability insurance and at what level.

How are their engineers assessed as competent on your specific equipment. What is their published callout time for a breakdown against a planned visit, and which hours does that cover.

Can they get parts for your model. What is the realistic lead time if a part is discontinued.

Finally, ask what the quote will include before anyone attends: parts, labour, call-out charge, minimum charge and out-of-hours rate, in writing.

A first visit is often diagnostic rather than curative, and a company that tells you that up front is being straight with you.

Anyone quoting a full replacement without seeing the equipment, or pressing for a decision on the phone, is worth a second opinion.

A lot of confusion between owners and lift companies comes from treating one contract as covering all.

Routine maintenance is planned, planned work: adjustment, lubrication, cleaning, checking that safety devices run as designed, and replacing wear items before they fail. It is planned at an interval set by the equipment.

Its age and how hard it is used. It is the visit that keeps a lift out of the breakdown queue.

Repair is what happens when something has already failed. It is reactive, it is usually quoted separately from a maintenance contract.

The parts position matters far more than the labour: an engineer can diagnose a controller or drive fault in a hour and then wait weeks for a component on older or discontinued equipment.

Ask early whether a fault is a repair or the beginning of an upgrade work conversation. Because the two have very different costs.

Compliance is separate again. Any lift used to carry people needs a thorough examination at the legal interval under LOLER. Done by a competent person who is independent of the routine maintenance work.

A maintenance contract on its own does not discharge that duty. A thorough examination is not a substitute for maintenance either.

Knowing which of the three you are buying prevents both duplicated spend and an inspection that quietly lapses.

If somebody is inside a lift right now, this is not the page to be reading.

Use the alarm or the emergency telephone in the car, or the number on the notice at the landing, keep talking to the person inside so they know help is coming, and wait for the release company or the emergency services.

Nobody should try to open the doors, move the car, or reach into a part-open doorway, but calm the situation seems.

If nobody is trapped, spend two minutes gathering detail before you call. Note where the car is sitting. Whether the doors are fully open, fully closed or part-open.

Exactly what any display or indicator shows including symbols and colours, any repeating sound and how often it repeats. Whether a key switch or fire-service switch has been operated.

Add when the behaviour started and whether anything changed beforehand, such as a power cut, water ingress or building works.

Then take the lift out of service, keep people away from it. Report what you have written down. All on that list can be observed from the landing.

Nothing on it needs opening a panel, entering a pit or shaft, or handling any part of the machinery, and none of those should be tried by anyone other than a lift engineer working under controlled conditions.

A written quote should be readable without a glossary. If it is not, that is a fair thing to challenge.

Look first for what is being priced: a single repair, a maintenance contract with a fixed number of visits per year, a thorough examination, or an upgrade work that replaces major components.

Those four are often blurred together in one figure. Separating them is the quickest way to see whether two quotes are actually similar.

Then look for the exclusions, because that is where the real cost usually hides.

Common ones are call-out charges outside working hours, a minimum labour charge per visit, parts billed separately from labour, scaffolding or access equipment, and anything described as consequential.

Water damage, builder's work, or making good after a component is replaced. A quote that lists its exclusions plainly is mostly from a company that intends to stand by the number.

Finally, check the assumptions about parts. On older or discontinued equipment a component may be reconditioned rather than new, sourced from a third party, or simply unavailable, and the quote should say which.

Ask what happens to the price and the timescale if the diagnosis changes once the engineer is on site. None of this needs technical knowledge.

It only needs asking every company the same questions and keeping the answers in writing.

Owners often assume the nearest company on a list is automatically the best call, and with lifts that is only half true.

Engineers work in territories rather than postcodes, and a firm two counties away with an engineer already covering your town may reach you sooner than one with an office down the road but a full diary.

Ask where the engineer who would actually attend is based. Not where the head office is registered.

Callout time is also two numbers, not one. There is the time to attend a breakdown. This is what a service level agreement usually quotes.

The time to complete the repair, which depends entirely on parts. A four-hour attendance on equipment whose controller board is discontinued is a four-hour visit followed by a wait.

Both numbers belong in any contract you sign, and a company that only quotes the first is telling you less than it appears.

Finally, consider cover hours. A lift in an office may only matter between eight and six. A lift that is somebody's only route out of their own home matters at three in the morning.

Make sure the contract you are quoted matches the reality of who depends on the equipment. Because out-of-hours cover is priced separately almost everywhere and is very difficult to add retrospectively during an incident.

Good records shorten every future callout and make quotes easier to challenge.

Keep the reports from each maintenance visit and each thorough examination together, in date order, with the equipment's make, model, serial or unit number and fitting date at the front.

That single folder answers most of the questions any new company will ask you. It makes changing provider straightforward rather than disruptive.

Alongside the paperwork, keep an informal fault log. One line per incident is enough: the date. What the lift did, what any display showed.

They attended and what they said they had done. Intermittent faults are the hardest kind to diagnose.

A log that shows the same behaviour appearing three times in wet weather is worth more to an engineer than any description given from memory on the phone.

Also record who is responsible for what.

Note who holds the maintenance contract, who arranges the thorough examination and acts as competent person, who the release company is for entrapments, and where the emergency notice at the landing points.

In managed buildings those four are often different groups. The worst time to work out which one to ring is while somebody is waiting inside the car.